The Sim-lab XERO-Play Quick Release offers a truly play-free long-lasting quick-release solution for your Direct Drive wheelbase. The parts are machined from alloy steel components and assembled with great precision to deliver constant performance.

This XERO-PLAY Quick-release is developed especially for Direct-Drive systems to be able to cope with extreme forces and vibrations.

The wheel side operates by pulling the ring which makes the wheel de-couple from the base side. These play-free Quick-Release system inner workings are based upon the conical shaft on the motor side. This Quick release is standard equipped with a 70 mm industry standard bolt pattern, additionally, other wheel sides can be purchased.

What’s included with XERO-Play Quick Release

Motor-side base with wheel-side, or wheel-side only
Hardware for most common situations
Allen-key for adjusting the tension
The total height of the assembly is 65 mm.

The Invicta Quick Release Adapter, you can finally connect your Cube Controls wheel directly to the Asetek SimSports® Wheelbase through the QR.

No more excuses! Connect your wheel and RACE HARD!

Introducing the Vitus Spacer which is the ultimate steering wheel extension. Designed to assist in perfecting that seating position whether that is a more upright position like a Touring/GT or a more laid down Formula style position. Achieving all this whilst maintaining a high quality product with a sleek design.

The Matt finish with a laser engraved logo means you wont have any issues with the spacer not looking stylish on your sim rig.

Three 5mm non-threaded holes and three M5 threaded holes for both 70 and 50.8 Pitch Circle Diameter on both sides gives you the most flexibility and strength. Constructed out of billet 6061 aluminum

Compatibility

Touring/GT Seating positon – 40 to 100mm

Formula Seating position – 100 to 120mm

Whats included?

Wheel Spacer

6x M5 Bolts

1x Alan key

Introducing the Vitus Spacer which is the ultimate steering wheel extension. Designed to assist in perfecting that seating position whether that is a more upright position like a Touring/GT or a more laid down Formula style position. Achieving all this whilst maintaining a high quality product with a sleek design.

The Matt finish with a laser engraved logo means you wont have any issues with the spacer not looking stylish on your sim rig.

Three 5mm non-threaded holes and three M5 threaded holes for both 70 and 50.8 Pitch Circle Diameter on both sides gives you the most flexibility and strength. Constructed out of billet 6061 aluminum

Compatibility

Touring/GT Seating positon – 40 to 100mm

Formula Seating position – 100 to 120mm

Whats included?

Wheel Spacer

6x M5 Bolts

1x Alan key

Introducing the Vitus Spacer which is the ultimate steering wheel extension. Designed to assist in perfecting that seating position whether that is a more upright position like a Touring/GT or a more laid down Formula style position. Achieving all this whilst maintaining a high quality product with a sleek design.

The Matt finish with a laser engraved logo means you wont have any issues with the spacer not looking stylish on your sim rig.

Three 5mm non-threaded holes and three M5 threaded holes for both 70 and 50.8 Pitch Circle Diameter on both sides gives you the most flexibility and strength. Constructed out of billet 6061 aluminum

Compatibility

Touring/GT Seating positon – 40 to 100mm

Formula Seating position – 100 to 120mm

Whats included?

Wheel Spacer

6x M5 Bolts

1x Alan key

Introducing the Vitus Spacer which is the ultimate steering wheel extension. Designed to assist in perfecting that seating position whether that is a more upright position like a Touring/GT or a more laid down Formula style position. Achieving all this whilst maintaining a high quality product with a sleek design.

The Matt finish with a laser engraved logo means you wont have any issues with the spacer not looking stylish on your sim rig.

Three 5mm non-threaded holes and three M5 threaded holes for both 70 and 50.8 Pitch Circle Diameter on both sides gives you the most flexibility and strength. Constructed out of billet 6061 aluminum

Compatibility

Touring/GT Seating positon – 40 to 100mm

Formula Seating position – 100 to 120mm

Whats included?

Wheel Spacer

6x M5 Bolts

1x Alan key

Introducing the Vitus Spacer which is the ultimate steering wheel extension. Designed to assist in perfecting that seating position whether that is a more upright position like a Touring/GT or a more laid down Formula style position. Achieving all this whilst maintaining a high quality product with a sleek design.

The Matt finish with a laser engraved logo means you wont have any issues with the spacer not looking stylish on your sim rig.

Three 5mm non-threaded holes and three M5 threaded holes for both 70 and 50.8 Pitch Circle Diameter on both sides gives you the most flexibility and strength. Constructed out of billet 6061 aluminum

Compatibility

Touring/GT Seating positon – 40 to 100mm

Formula Seating position – 100 to 120mm

Whats included?

Wheel Spacer

6x M5 Bolts

1x Alan key

The B-G Racing 80mm Spacer which comes in a black anodised finish is made from high quality aluminium and comes complete with fixing screws.

B-G Steering wheel spacers are designed to bring the steering wheel closer to the driver for improved steering input and driver comfort.

Multi-drilled for both 6x70mm and 6x74mm PCD bolt patterns to accommodate the majority of aftermarket steering wheels, enabling cross compatibility between hub kits and steering wheels with either 6x70mm or 6x74mm PCD patterns. This means you can use your MOMO steering wheel with your Nardi-Personal hub kit or vice versa. Can also be utilised as a simple hub spacer when used with a steering wheel and hub kit with identical PCD bolt patterns.

The B-G Racing Steering Wheel Spacer is also available in sizes: 10mm, 20mm, 40mm, 60mm, 100mm, and 120mm, sold separately. To view the range please click here.

• First Class Design
• Impeccable Racing Pedigree
• One Year Warranty

The Asetek Front Mount is not only designed to look cool, but it also lets you to mount your Asetek SimSports® Direct Drive wheelbase by attaching the front of the wheelbase directly to the rig, offering you a quick, sturdy and straightforward mounting option. This also makes it possible to mount on inside or outside of the rig with easy adjusting opportunities.

The two holes on each side of the front mount gives you an option to attach your on/off and torque off buttons for a sleek look on your sim rig. The Front Mount is specially designed for the Asetek SimSports® wheelbases and bolts directly into the aluminium housing of the wheelbase. The 8 mm thick laser cut steel mount is a no-compromises mounting solution.

The mounting option on your rig also allows a high degree of tilt so you can adjust the angle of the wheelbase to your preferred driving position. Adjusting the tilt angle is straightforward with four screws; two on each side of your rig